The Bead Self-Locking Stainless Steel Cable Tie coated with Polyester provides a strong, durable method of bundling, identifying and fastening, which can be used in virtually all indoor, outdoor and underground (including direct burial) applications, where severe environmental conditions exist. The ties are designed for use in critical applications where strength, vibration, radiation, weathering, corrosion and temperature extremes are a factor. These cable ties are made from either 316 marine grade stainless steel or 304 stainless steel. It has a fully coated roller ball tie, recommended for extreme cold conditions and offshore applications. This can be installed by hand or tool. Coating is corrosive resistance, UV stabilised material, low-smoke halogen free and fire retardant. Ordering Example: _ Material F= 304 Stainless Steel, S= 316 Stainless Steel BT-120XXX_-Y series at 12.0 mm band width BT-160XXX_-Y series at 16.0 mm band width MOQ: 200+
CB-HFT (600) is halogen-free, flexible, flame-retardant polyolefin heat-shrinkable tuning. This tubing is low smoke generating abrasion resistant and in case of burning, produce no dioxin. CB-HFT (600) tubing is widely used in enclosed areas where flame-retardant, halogen-free environment is required. Certifications: UL, CUL, F-Mark, Sony Green Partner Shrink Temperature: 90˚C Operating Temperature Range (UL224): -55˚C-125˚C Radial Shrink Ratio: >50% Longitudinal Change (ASTM D2671): -5% -+5% Tensile Strength (ASTM D638): >10.4 MPs Elongation at Break (ASTM D638): >200% Aging in Circulation Air Oven (158˚C +/- 1.0˚C, 168 Hrs): Pass Tensile Strength after (Aging ASTM D638): >7.3 MPs Elongation at Break after Aging (ASTM D638): >100% Volume Resistance (ASTM D2671): >1.0 x 1012 Ω/cm Dielectric Strength (UL224 AC2500V, 1min): No Breakdown Heat Shock (UL224): No Cracking Flammability (UL224): VW-1 Flame Concentricity (ASTM D2671): >70% Price in meter and please refer to the min quantity (in meter) per roll
The Honeywell TR50 Series IAQ Sensor is an advanced, configurable device for commercial buildings. It monitors: Temperature (T), Relative Humidity (RH), Carbon Dioxide (CO2), Particulate Matter (PM1.0, PM2.5, PM10), Total Volatile Organic Compound (TVOC). Flexible building automation system integration via Modbus, BACnet, or Sylk bus protocols. Customizable display and sensor thresholds with stable long-term accuracy for minimal maintenance or recalibration.
Solenoid valves are used for a variety of applications to control the compressed air for applications including operable door or window. Solenoid valves safely and effectively control the compressed air, therefore allowing products to operate at the optimal capacity. Although a single solenoid valve can be used for control one group, at times, more than one valve needs to be used to control more groups. This is when solenoid valve manifolds become beneficial. Since a solenoid valve manifold uses multiple solenoid valves in one valve bank, the manifold can direct the flow of compressed air in multiple directions and saving spaces. The connector can be adjusted according to the project's requirements.
This new battery charger is designed with a modern outlook incorporating detailed indications including power supply status, battery condition, output ammeter and voltage values…etc. Furthermore, it also comes with various pairs of dry contact for signals such as Battery Low, Battery Fault, Battery On and Mains Failure for system integration with other parties.
10 inch tablet (Android) to access EC-MASTER for remote monitoring CPU: T310 Quad Core Memory: 4G
EC-IO Module communicate with EC-Node to control and monitor the field devices.
Communicate with all local devices and EC-MASTER to provide fully addressable monitor and control. Flexible programming up to 9,999 input and output zones and able to perform cross zone controls. Each EC-Node can connect up to 32 nos RS485 field devices
EC-MASTER controller design for large scale remote control and monitor system. Acts as a master to interface with EC-Node and EC-IO Module to expand a addressable remote monitoring and control system for different kinds of building automation system, such as fire alarm status, climate control system for automated door and window etc. - Each EC-MASTER is allow to connect 128 no of NV-Node (max.) - Expandable to large EC-Master network via TCP/IP - Flexible strategy programming - Provide internal watchdogs to increase system reliability - Web-server capability for remote access with mobile or standard browser
Monitoring Module BMS100 can be used in various industrial automation measurement and control systems. It can measure 4-20mA and 0-5V transducer signal of pressure, temperature, current etc.